Cycle Time |
N/A 56 sec |
Total Normal Force |
N/A 46700 lbf208 kN |
Total Maximum Force |
N/A 55100 lbf245 kN |
Normal Ram Face Pressure |
N/A 26.8 psi185 kPa |
Maximum Ram Face Pressure |
N/A 31.7 psi219 kPa |
Ram Penetration |
N/A 14 in356 mm |
Electrical Motor Power (3/60 to 208/230/460) |
N/A 10 hp7.5 kW |
AC Electrical Control Voltage |
N/A 120 V |
Certification |
N/A ANSI Regulation Z245.2 NEMA OSHA UL Listed |
Electrical Equipment Specifications |
N/A
|
Hydraulic Pump Capacity |
N/A 13 gpm49.2 L/min |
Normal Pressure |
N/A 1650 psi114 bar |
Maximum Pressure |
N/A 1950 psi134 bar |
Hydraulic Cylinder Bore Diameter |
N/A 6 in152 mm |
Hydraulic Cylinder Rod Diameter |
N/A 22 1/2 in64 mm |
Weight |
N/A 5150 lbs2336 kg |
N/A
|
N/A The packing ram is supported and guided by specially formulated cast iron shoes which ride on replaceable wear strips. This exclusive design protects the charge box floor from the full force of the packing ram, extending its life and dramatically reducing compaction-robbing friction. |
N/A
|
N/A Pictures in this literature are illustrative only. Specifications are subject to change without notice in order to accommodate improvements to the equipment. Certified in compliance with ANSI Regulation Z245.2, all OSHA standards, and certified under WASTEC's Stationary Compactor Certification Program. Products must be used with safe practice and in accordance with said regulations and standards. |