Charge Box Capacity - Mfrs. Rating |
N/A 3.15 yd³2.41 m³ |
Charge Box Capacity - WASTEC Rating |
N/A 2.55 yd³1.95 m³ |
Clear Top Opening |
N/A 67 1/2 x 60 in1715 x 1524 mm |
Capacity per Hour |
N/A 184 yd³141 m³ |
Industry Standards/Certifications |
N/A
 Industry Standards/Certifications |
Cycle Time |
N/A 50 sec |
Total Normal Force |
N/A 46700 lbf208 kN |
Total Maximum Force |
N/A 55100 lbf245 kN |
Normal Ram Face Pressure |
N/A 26.8 psi185 kPa |
Maximum Ram Face Pressure |
N/A 31.7 psi219 kPa |
Ram Penetration |
N/A 13 in330 mm |
TEFC Electrical Motor Power (3/60 to 208/230/460) |
N/A 15 hp11 kW |
AC Electrical Control Voltage |
N/A 120 V |
Certification |
N/A ANSI Regulation Z245.2 NEMA OSHA UL Listed |
Electrical Equipment Specifications |
N/A
|
Hydraulic Pump Capacity |
N/A 18.5 gpm70 L/min |
Normal Pressure |
N/A 1650 psi114 bar |
Maximum Pressure |
N/A 1950 psi135 bar |
Hydraulic Cylinder Bore Diameter |
N/A 6 in152 mm |
Hydraulic Cylinder Rod Diameter |
N/A 4 in102 mm |
Reservoir Capacity |
N/A 20 gal76 L |
Packer Body: Side Plate Dimension |
N/A 3/16 in4.76 mm |
Charge Box Floor Dimension |
N/A 1/2 in12.7 mm |
Ram Face Plate Dimension |
N/A 1/2 in12.7 mm |
Ram Bottom Dimension |
N/A 3/8 in9.53 mm |
Ram Side Dimension |
N/A 1/4 in6.35 mm |
Ram Top Dimension |
N/A 1/4 in6.35 mm |
Weight |
N/A 6700 lbs3038 kg |
|
The RJ-325 is stress engineered for durability. That means the strength is where it belongs - like the 1/2" charge box floor reinforced with seven heavy duty steel channels, 1/2" steel plate ram face backed with 10" structural channels and extra rugged reinforced sides. |
|
The packing ram is supported by specially formulated cast iron shoes which ride on replaceable wear strips. This exclusive design protects the charge box floor from the full force of the packing ram, extending its life and dramatically reducing compaction-robbing friction. |
|
The RJ-325 & 325HD have industrial grade electrical and hydraulic components - all totally UL Listed! The controls are contained in an NEMA 4 enclosure and connected to the power unit with 13 ft. of Sealtite. The pump is rigidly secured to a "C" flange motor with a machined bracket for assured coupling alignment. |
|
Pictures in this literature are illustrative only. Specifications are subject to change without notice in order to accommodate improvements to the equipment. Certified in compliance with ANSI Regulation Z245.2, all OSHA standards, and certified under WASTEC's Stationary Compactor Certification Program. Products must be used with safe practice and in accordance with said regulations and standards. |
