N/A

• Paint Color: Medium Brown
• UL Listed Controls
• Key Lock System
• Start Button
• Emergency Stop Button with "Power On" Light
• Auto/Manual Platen Direction Switch Hydraulic Bale Eject Switch (When Applicable)
• Oil Sight Gauge
• Three Phase Tri-volt (208, 230, 460) Motor
• Automatic Raise Safety Feed Gate
• Front Load/Front Bale Eject
• Right Hand Hinged Bale Chamber Door (Determined by Facing the Front of the Baler)
• Wheel Turnbuckle Lock for Bale Chamber Door 85000# Capacity
• Enclosed Safety Interlocks on Feed Gate and Bale Chamber Door
• Side Mounted Power Unit with Oil and Safety Screen
• Soft Shift Hydraulic Valve System
• Platen Safety Cable
• Manual Chain Bale Eject Mechanism
• Visual Bale Size Indicator
• Bale Retainer Teeth
• Platen Guide System
• Forklift Pockets in the Base
• Bolt-on Anchor Mounting Brackets

N/A

• 3000 PSi Pressure Gauge
• Automatic Bale Sizer with Full Bale Indicator
• Single Phase Motor System
• TEFC Motor
• Control Panel Located Electrical Disconnect
• Thermo Oil Heater
• Oil Temperature Shut-Down with Indicator
• Low Oil Shut-Down with Indicator
• Power Unit Weather Cover
• Wall Brackets for Wire Storage
• Front Bale Wire Feed System
• Retractable Retainer Teeth

N/A

• Oil Sight Gauge
• Oil Fill Cap and Clean Out
• Soft Shift Hydraulic System increase hydraulic component life by reducing hydraulic systems hock, also increases bale weight by momentarily retaining pressure on the baled material at the bottom of the platen stroke
• Power Unit with Safety Screen mounted on the side to lower the center of gravity. The side mounted power unit makes servicing safer and easier than balers with top mounted power units.
• UL Approved Electrical Control Panel
• The Wheel Turnbuckle Door Lock releases pressure on the door slowly and is recessed to protect it from accident damage.
• Anchor Brackets
• Grease Fittings on door and lock hinges
• Standard Controls include a keyed on/off switch, start button, emergency stop button with "power on" light, automatic/manual mode switch, manual up/down switch when applicable.
• Optional Bale Size Indicator
• Control Guard
• The Feed Chamber Gate opens automatically on the up stroke of the platen and is equipped with a Safety Interlock Switch.
• Lifting Lugs
• Enclosed Counter Balance
• Platen Safety Cable
• Bale Size Indicator
• The platen is engineered to receive the force of the cylinder on the platen surface not the 1-1/2" Stress Proof Pin which fastens the platen to the cylinder.
• Bale Eject Mechanism
  A Hydraulic Bale Eject Mechanism is standard on all models except the VB-3624-E and VB-60-E which are equipped with a Manual Chain Eject Mechanism.
• Bale Chamber Door
• Bale Retainer Teeth
  Mounted on the door and the back of the bale chamber
• Close-Tolerance Nylatron Platen Guide System
• High density
• Economy