The O'Keefe Group, Inc. .
The O'Keefe Group, Inc.
17 Bank Street
Attleboro, MA 02703-0240
Toll-Free: 800-872-7488
Email: mokeefe@theokeefegroupinc.com
Website: www.tog.us.com
Print Back
The SP Industries SCS series of Self-contained Compactor/Container consists of a large two cubic yard capacity compactor with a rugged octagon or rectangular container. An SCS has all of the features of an SC series with a number of important additions including: a compactor with more capacity, a larger clear top opening, and a longer container.

The SCS compaction ram is powered by dual crossed cylinders which actually allow for a larger compaction chamber size within a shorter compactor. An SCS compared to an SC model of equal length will have a greater capacity.
Unit of Measure

Specifications

Capacity1 N/A 35 yd³
Universal Understructure Overall Length (L)2 N/A 24 ft 4-1/2 in.

Deadlift Understructure Overall Length

 N/A 24 ft 7 in.

Hooklift Understructure Overall Length

 N/A 25 ft 3 in.

Hooklift Understructure Overall Length with Fold-Down, Compactor End Hook

 N/A 25 ft 5 in.

Weight

 N/A 11150 lbs

Remote Power Unit Weight with Oil

 N/A 550 lbs

Manufacturer's Rating

 N/A 2 yd³

WASTEC Type Rating

 N/A 1.57 yd³

Clear Top Opening Length

 N/A 40 in

Clear Top Opening Width

 N/A 56.5 in

Chamber Length

 N/A 42 in

Ram Stroke

 N/A 46.5 in

Ram Penetration

 N/A 5.5 in

Ram Force Rating

 N/A 27.6 psi

Stated Force Rating

 N/A 49200 lbs

Hydraulic System Pressure

 N/A 2250 psi

Ram Face Width

 N/A 59.5 in

Ram Face Height

 N/A 30 in

Cycle Time

 N/A 36 sec

Volume Displacement

 N/A 158 yd³/h

Motor Power

 N/A 10 hp

Pump Flow

 N/A 10 gpm

Oil Reservoir Capacity

 N/A 25 gal

Number of Cylinders

 N/A 2

Cylinder Bore Size

 N/A 4 in

Cylinder Rod Size

 N/A 2-1/2 in

Cylinder Stroke Length

 N/A 34 in

Motor Voltage

 N/A 208 V230 V460 V

Motor Phase

 N/A 3

Hopper Capacity

 N/A 2 yd³

Power Cable Size

 N/A 10 ft

Style

 N/A Octagon Rectangular

Hydralic Power Unit Width

 N/A 24 in

Hydralic Power Unit Length

 N/A 46 in

Hydralic Power Unit Height

 N/A 32 in

Hose Size

 N/A 10 ft

Certification

 N/A ANSI Z245.2 ANSI Z245.30 ANSI Z245.60 UL Listed

Material Specifications

Compactor Frame Floor Plate

 N/A 3/8 in. 1045/AR 235

Compactor Frame Floor Plate Supports

 N/A TS 2 x 2 x 3/16 in. Bar 2 x 1/2 in.

Compactor Frame Side Plate

 N/A 1/4 in

Compactor Frame Side Supports

 N/A 6 x 2-1/2 in. 10 GA Formed Channel

Compactor Frame Breaker Bar

 N/A L 6 x 6 x 1/2 in. & TS 2 x 6 x 1/4 in. with Retainer Teeth

Compactor Frame Ram Hold Down Bars

 N/A 1 x 1-1/2 in

Ram Face Plate

 N/A 1/2 in

Ram Floor Plate

 N/A 1/2 in

Ram Side Plate

 N/A 1/4 in

Ram Top Plate

 N/A 1/4 in

Ram Top Plate Supports

 N/A C 4 in. x 5.4#

Container Floor and Side Plate

 N/A 7 gauge

Container Floor Supports (On 20 in. Centers)

 N/A C 3 in. x 4.1#

Container Roof Plate

 N/A 10 gauge

Container Main Rails

 N/A TS 2 x 6 x 1/4 in

Container Bull Nose

 N/A 1-1/4 in. Solid Steel Burn-Out

Total Number of Wheels

 N/A 4

Container Wheel Width

 N/A 5 in

Container Wheel Diameter

 N/A 6-5/8 in

General Description

N/A Self-Contained-Portable Leak Resistant

The remote power unit can be placed in any convenient location for protection from weather, accidents, and vandalism. All electrical components are UL listed.

Standard Features

N/A

  • Automatic Multi-cycle System
  • Multi Minute Cycle Timer
  • Panel Mounted:
    • Key Locked Start Button
    • Emergency Stop Button
    • Reverse Button
  • Tri-volt Selection (208, 230 or 460, 3 Phase)
  • Pressure Switch Soft-Shift System
  • Monitor Gauge (Advance Full/Full Load Warning Pressure Gauge)
  • Oil Suitable for Wide Temperature Range (-40 ºF Pour Point)
  • 10' Hydraulic Hoses with Quick Disconnects
  • Provisions for Quick Disconnects Mounted on Left and Right Hand Sides
  • Oil Spill Pan Mounted Under Both Quick Disconnect Locations
  • Oil Level Gauge with Thermometer
  • 10' Power Supply Cable
  • Removable Compactor Access Panel
  • Nylatron Ram Guide System
  • Octagon Container
  • Rear Container Door:
    • Full Seal
    • Ratchet Locking System
    • Heavy-Duty Adjustable Hinge System
  • Four Wheels with Grease Fittings
  • Universal or Deadlift Understructure with Double End Pick-Up
  • Container Inspection Port

Optional Features

N/A

  • Remote Control Station with 10' Cable
  • Keyed Jog Controls
  • Advance Full Load Indicator
  • Low/Hot Oil Indicator Light with Shut-Off
  • Thermo Oil Heater
  • TEFC Motor
  • Deodorizer or Disinfectant Spray System
  • Power Unit Cover with Lockable Door
  • Walk-on and Heavy-Duty Decks
  • Safety Hand and Toe Rails
  • Rear or Side Load Hoppers
  • Rear or Side Load Security Chutes
  • Dog House Hoppers with Interlocked Door(s)
  • Container Centering Guide
  • Rectangular or Special Container Style
  • Double End Pick-Up for Dumpster and Hooklift Understructures
  • Special Understructures
  • Special Shortened or Cut-Down Container
  • Wear Strips on Main Rails
  • Heavy 6" x 2" x 3/8" Main Rails
  • Low Profile Compactor

Industrial Features

N/A

  • 2 Cu. Yd. Hopper Capacity, Heavy-Duty, Industrial Compactor
  • 15, 20, 30, and 34 Cubic Yard Capacity
  • Ideal for Wet Waste-Leak Resistant Sump
  • Installs On the Dock or Ground-Level
  • Multi-Cycle with One Push of the Start Button, Cycle 1 to 10 Times.
  • Meets or Exceeds Current ANSI Z245.2 Safety Standards

Rental Program Benefits

N/A

  • Compactor Rental Plan
  • Choice of Maintenance Plans
  • 100% Tax Deductible
  • Biodegradable Oil Options
  • 99% Run-Time Reliability
  • Paper and Plastics Recycling
  • Access to TOG Advisory Service
  • Access to On-Going Service Management
  • Optional Door-Seal Protection Plan

Caution

N/A This equipment should be operated by properly trained personnel. Improper use, misuse, or lack of maintenance could cause injury to people and/or property. Photos used in this brochure are illustrative only. Due to its commitment to quality, SP Industries' specifications are subject to change without notice to accommodate improvements to its equipment. Information contained within this literature is intended to be the most accurate available at the time of printing.

Note

N/A Check that the overall length of the unit does not exceed the maximum length that the hoist can haul. Special understructures may change the overall length of the machine.

  • 1 A frame pull understracture is available. It will reduce the length of the unit by 10 in. and the capacity by approximately 1.3 cubic yards.
  • 2 Overall lengths shown are for Standard Universal Understructures only.