|
N/A
- Oil Sight Gauge
- Oil Fill Cap and Clean Out
- Soft Shift Hydraulic System increase hydraulic component life by reducing hydraulic systems hock, also increases bale weight by momentarily retaining pressure on the baled material at the bottom of the platen stroke
- Power Unit with Safety Screen mounted on the side to lower the center of gravity. The side mounted power unit makes servicing safer and easier than balers with top mounted power units.
- UL Approved Electrical Control Panel
- The Wheel Turnbuckle Door Lock releases pressure on the door slowly and is recessed to protect it from accident damage.
- Anchor Brackets
- Grease Fittings on door and lock hinges
- Standard Controls include a keyed on/off switch, start button, emergency stop button with "power on" light, automatic/manual mode switch, manual up/down switch when applicable.
- Optional Bale Size Indicator
- Control Guard
- The Feed Chamber Gate opens automatically on the up stroke of the platen and is equipped with a Safety Interlock Switch.
- Lifting Lugs
- Enclosed Counter Balance
- Platen Safety Cable
- Bale Size Indicator
- The platen is engineered to receive the force of the cylinder on the platen surface not the 1-1/2" Stress Proof Pin which fastens the platen to the cylinder.
- Bale Eject Mechanism
A Hydraulic Bale Eject Mechanism is standard on all models except the VB-3624-E and VB-60-E which are equipped with a Manual Chain Eject Mechanism. - Bale Chamber Door
- Bale Retainer Teeth
Mounted on the door and the back of the bale chamber - Close-Tolerance Nylatron Platen Guide System
- High density
- Economy
|
